// $Id: README.txt,v 1.4.2.10.2.17 2011-02-01 19:54:31 Jeremy Exp $

## Requirements ##

- PHP 5.1 or greater
- Availability of a memcached daemon: http://memcached.org/
- One of the two PECL memcache packages:
  - http://pecl.php.net/package/memcache (older, most stable)
  - http://pecl.php.net/package/memcached (newer, possible performance issues)

## INSTALLATION ##

These are the broad steps you need to take in order to use this software. Order
is important.

1. Install the memcached binaries on your server. See 

http://www.lullabot.com/articles/how_install_memcache_debian_etch

2. Install the PECL memcache extension for PHP. This must be version 2.2.1 or 
   higher or you will experience errors.
3. Put your site into offline mode.
4. Download and install the memcache module.
5. If you have previously been running the memcache module, run update.php.
6. Start at least one instance of memcached on your server.
7. Edit settings.php to configure the servers, clusters and bins that memcache
   is supposed to use.
8. Edit settings.php to include either memcache.inc. For
   example, $conf['cache_inc'] ='sites/all/modules/memcache/memcache.inc';
9. Bring your site back online.

For instructions on 1 and 2 above, please see the INSTALLATION.txt file that
comes with the memcache module download.

The memcache.inc file is intended to be used instead of cache.inc, utilizing
Drupal's pluggable cache system.

memcache.db.inc IS DEPRECATED AND IS NOT RECOMMENDED. It is still distributed
with the 6.x-1.x branch, but will not be included in any further versions and
may be removed in future 6.x releases.

Update $conf in settings.php to tell Drupal where the cache_inc file is:

 $conf = array(
   // The path to wherever memcache.inc is. The easiest is to simply point it
   // to the copy in your module's directory.
   'cache_inc' => './sites/all/modules/memcache/memcache.inc',
 );

## SERVERS ##

If you want the simple version, you can start one default memcache instance on
your web server like this: memcached -m 24 -p 11211 -d
If that is enough to meet your needs, there is no more configuration needed. If
you want to utilize this module's sophisticated clustering feature and spread
your cache over several machines, or if your cache is found on a machine other
than your web server, read on.

The available memcached servers are specified in $conf in settings.php. If
you do not specify any servers, memcache.inc assumes that you have a
memcached instance running on 10.0.0.1:11211. If this is true, and it is
the only memcached instance you wish to use, no further configuration is
required.

If you have more than one memcached instance running, you need to add two
arrays to $conf; memcache_servers and memcache_bins. The arrays follow this
pattern:

'memcache_servers' => array(
  host1:port => cluster, 
  host2:port => cluster, 
  hostN:port => cluster
)

'memcache_bins' => array(bin1 => cluster, bin2 => cluster, binN => cluster)

The bin/cluster/server model can be described as follows:

- Servers are memcached instances identified by host:port.

- Bins are groups of data that get cached together and map 1:1 to the $table
  param in cache_set(). Examples from Drupal core are cache_filter,
  cache_menu. The default is 'cache'.

- Clusters are groups of servers that act as a memory pool.

- many bins can be assigned to a cluster.

- The default cluster is 'default'.

Here is a simple setup that has two memcached instances, both running on
localhost. The 11212 instance belongs to the 'pages' cluster and the table
cache_page is mapped to the 'pages' cluster. Thus everything that gets cached,
with the exception of the page cache (cache_page), will be put into 'default',
or the 11211 instance. The page cache will be in 11212.

$conf = array(
  ...
  // Important to define a default cluster in both the servers
  // and in the bins. This links them together.
  'memcache_servers' => array('10.0.0.1:11211' => 'default',
                              '10.0.0.1:11212' => 'pages'),
  'memcache_bins' => array('cache' => 'default',
                           'cache_page' => 'pages'),
);

Here is an example configuration that has two clusters, 'default' and
'cluster2'. Five memcached instances are divided up between the two
clusters. 'cache_filter' and 'cache_menu' bins go to 'cluster2'. All other
bins go to 'default'.

$conf = array(
  'cache_inc' => './sites/all/modules/memcache/memcache.inc',
  'memcache_servers' => array('10.0.0.1:11211' => 'default',
                              '10.0.0.1:11212' => 'default',
                              '123.45.67.890:11211' => 'default',
                              '123.45.67.891:11211' => 'cluster2',
                              '123.45.67.892:11211' => 'cluster2'),

  'memcache_bins' => array('cache' => 'default',
                           'cache_filter' => 'cluster2',
                           'cache_menu' => 'cluster2'),
);

Here is an example configuration where the 'cache_form' bin is set to bypass
memcache and use the standard table-based Drupal cache by assigning it to a
cluster called 'database'.

$conf = array(
  ...
  'memcache_servers' => array('10.0.0.1:11211' => 'default'),
  'memcache_bins' => array('cache' => 'default',
                           'cache_form' => 'database'),
);

## memcache_extra_include and database.inc ##

In the above example, mapping a bin to 'database' makes a cache be stored
in the database instead of memcache. This is actually done by the file
database.inc, which is copy and pasted from DRUPAL/includes/cache.inc. 
If you want to provide an alternate file instead of database.inc to handle
the cache calls to 'database', override the variable memcache_extra_include
in settings.php to provide the location of the file to include. This only
applies if you are using memcache.inc (not memcache.db.inc, which is deprecated).


## PREFIXING ##

If you want to have multiple Drupal installations share memcached instances,
you need to include a unique prefix for each Drupal installation in the $conf
array of settings.php:

$conf = array(
  ...
  'memcache_key_prefix' => 'something_unique',
);

## SESSIONS ##

Here is a sample config that uses memcache for sessions. Note you MUST have
a session and a users server set up for memcached sessions to work.

$conf = array(
  'cache_inc' => './sites/all/modules/memcache/memcache.inc',
  'session_inc' => './sites/all/modules/memcache/memcache-session.inc',
  'memcache_servers' => array(
    'localhost:11211' => 'default',
    'localhost:11212' => 'filter',
    'localhost:11213' => 'menu',
    'localhost:11214' => 'page',
    'localhost:11215' => 'session',
    'localhost:11216' => 'users',
  ),
  'memcache_bins' => array(
    'cache' => 'default',
    'cache_filter' => 'filter',
    'cache_menu' => 'menu',
    'cache_page' => 'page',
    'session' => 'session',
    'users' => 'users',
  ),
);


## TROUBLESHOOTING ##

PROBLEM:
Error:
Failed to set key: Failed to set key: cache_page-......

SOLUTION:
Upgrade your PECL library to PECL package (2.2.1) (or higher).

WARNING: 
Zlib compression at the php.ini level and Memcache conflict. 
See http://drupal.org/node/273824

## MEMCACHE ADMIN ##

A module offering a UI for memcache is included. It provides stats, a
way to clear the cache, and an interface to organize servers/bins/clusters.


## Memcached PECL Extension Support

The Drupal memcach modules supports both the memcache and the memcached PECL
extensions.  If you install the newer memcached extension, it will be used by
default. This new extension backends to libmemcached and allows you to use some
of the newer advanced features in memcached 1.4.  We highly recommend that you
test with both PECL extensions to determine which is a better fit for your
infrastructure.

NOTE: It is important to realize that the memcache php.ini options do not impact
the memcached extension, this new extension doesn't read in options that way.
Instead, it takes options directly from Drupal. Because of this, you must
configure memcached in settings.php. Please look here for possible options:

http://us2.php.net/manual/en/memcached.constants.php

An example configuration block is below, this block also illustrates our
default options. These will be set unless overridden in settings.php.

$conf['memcache_options'] = array(
  Memcached::OPT_COMPRESSION => FALSE,
  Memcached::OPT_DISTRIBUTION => Memcached::DISTRIBUTION_CONSISTENT,
);

These are as follows:

 * Turn off compression, as this takes more CPU cycles than its worth for most
   users
 * Turn on consistent distribution, which allows you to add/remove servers
   easily

If you are using memcached 1.4 or above, you should enable the binary protocol,
which is more advanced and faster, by adding the following to settings.php:

$conf['memcache_options'] = array(
  Memcached::OPT_BINARY_PROTOCOL => TRUE,
);