// $Id: README.txt,v 1.4.2.10.2.5 2009-01-29 18:01:47 jeremy Exp $

## INSTALLATION ##

These are the broad steps you need to take in order to use this software. Order
is important.

1. Install the memcached binaries on your server. See 

http://www.lullabot.com/articles/how_install_memcache_debian_etch

2. Install the PECL memcache extension for PHP. This must be version 2.2.1 or 
   higher or you will experience errors.
3. Put your site into offline mode.
4. Download and install the memcache module.
5. If you have previously been running the memcache module, run update.php.
6. Start at least one instance of memcached on your server.
7. Edit settings.php to configure the servers, clusters and bins that memcache
   is supposed to use.
8. Edit settings.php to include either memcache.inc or memcache.db.inc. For
   example, $conf['cache_inc'] ='sites/all/modules/memcache/memcache.db.inc';
9. Bring your site back online.

For instructions on 1 and 2 above, please see the INSTALLATION.txt file that
comes with the memcache module download.

Either the memcache.inc or the memcache.db.inc file is intended to be used
instead of cache.inc, utilizing Drupal's pluggable cache system. The .db.inc
variant saves all data to the database as well, so the site will still have
the performance benefits of cache even if you take your memcache offline. The
site should not ever break due to memcache not being available...it is only
a question of whether caching is still available or not. The memcache.inc file
doesn't save any data to the database and thus has the biggest potential for
increasing your site's performance. If you use this file it is important to
have enough memory allocated to memcache to store everything (including the page
cache), otherwise the cache misses will negate the benefit of the cache hits.

Note that memcache.db.inc support a global minimum cache lifetime, whereas
memcache.inc tracks the minimum cache lifetime on a per-table basis:

http://www.lullabot.com/files/memcache-inc.png
http://www.lullabot.com/files/memcache-db-inc.png

Update $conf in settings.php to tell Drupal which cache_inc file to use:

 $conf = array(
   // The path to wherever memcache.inc is. The easiest is to simply point it
   // to the copy in your module's directory.
   'cache_inc' => './sites/all/modules/memcache/memcache.inc',
   // or
   // 'cache_inc' => './sites/all/modules/memcache/memcache.db.inc',
 );

## SERVERS ##

If you want the simple version, you can start one default memcache instance on
your web server like this: memcached -m 24 -p 11211 -d
If that is enough to meet your needs, there is no more configuration needed. If
you want to utilize this module's sophisticated clustering feature and spread
your cache over several machines, or if your cache is found on a machine other
than your web server, read on.

The available memcached servers are specified in $conf in settings.php. If
you do not specify any servers, memcache.inc assumes that you have a
memcached instance running on localhost:11211. If this is true, and it is
the only memcached instance you wish to use, no further configuration is
required.

If you have more than one memcached instance running, you need to add two
arrays to $conf; memcache_servers and memcache_bins. The arrays follow this
pattern:

'memcache_servers' => array(
  host1:port => cluster, 
  host2:port => cluster, 
  hostN:port => cluster
)

'memcache_bins' => array(bin1 => cluster, bin2 => cluster, binN => cluster)

The bin/cluster/server model can be described as follows:

- Servers are memcached instances identified by host:port.

- Bins are groups of data that get cached together and map 1:1 to the $table
  param in cache_set(). Examples from Drupal core are cache_filter,
  cache_menu. The default is 'cache'.

- Clusters are groups of servers that act as a memory pool.

- many bins can be assigned to a cluster.

- The default cluster is 'default'.

Here is a simple setup that has two memcached instances, both running on
localhost. The 11212 instance belongs to the 'pages' cluster and the table
cache_page is mapped to the 'pages' cluster. Thus everything that gets cached,
with the exception of the page cache (cache_page), will be put into 'default',
or the 11211 instance. The page cache will be in 11212.

$conf = array(
  ...
  // Important to define a default cluster in both the servers
  // and in the bins. This links them together.
  'memcache_servers' => array('localhost:11211' => 'default',
                              'localhost:11212' => 'pages'),
  'memcache_bins' => array('cache' => 'default',
                           'cache_page' => 'pages'),
);

Here is an example configuration that has two clusters, 'default' and
'cluster2'. Five memcached instances are divided up between the two
clusters. 'cache_filter' and 'cache_menu' bins goe to 'cluster2'. All other
bins go to 'default'.

$conf = array(
  'cache_inc' => './includes/memcache.inc',
  'memcache_servers' => array('localhost:11211' => 'default',
                              'localhost:11212' => 'default',
                              '123.45.67.890:11211' => 'default',
                              '123.45.67.891:11211' => 'cluster2',
                              '123.45.67.892:11211' => 'cluster2'),

  'memcache_bins' => array('cache' => 'default',
                           'cache_filter' => 'cluster2',
                           'cache_menu' => 'cluster2'),
);
## PREFIXING ##

If you want to have multiple Drupal installations share memcached instances,
you need to include a unique prefix for each Drupal installation in the $conf
array of settings.php:

$conf = array(
  ...
  'memcache_key_prefix' => 'something_unique',
);

## SESSIONS ##

Here is a sample config that uses memcache for sessions. Note you MUST have
a session and a users server set up for memcached sessions to work.

$conf = array(
  'cache_inc' => './sites/all/modules/memcache/memcache.db.inc',
  'session_inc' => './sites/all/modules/memcache/memcache-session.inc',
  'memcache_servers' => array(
    'localhost:11211' => 'default',
    'localhost:11212' => 'filter',
    'localhost:11213' => 'menu',
    'localhost:11214' => 'page',
    'localhost:11215' => 'session',
    'localhost:11216' => 'users',
  ),
  'memcache_bins' => array(
    'cache' => 'default',
    'cache_filter' => 'filter',
    'cache_menu' => 'menu',
    'cache_page' => 'page',
    'session' => 'session',
    'users' => 'users',
  ),
);


## TROUBLESHOOTING ##

PROBLEM:
Error:
Failed to set key: Failed to set key: cache_page-......

SOLUTION:
Upgrade your PECL library to PECL package (2.2.1) (or higher).

WARNING: 
Zlib compression at the php.ini level and Memcache conflict. 
See http://drupal.org/node/273824

## MEMCACHE ADMIN ##

A module offering a UI for memcache is included. It provides stats, a
way to clear the cache, and an interface to organize servers/bins/clusters.